BEST DAD EVER SVG FREE

Do you struggle to wonder what Dad really wants? Let’s make it easy on all of us! If he likes to drink ANYTHING from a glass bottle, aka Beer, Rootbeer, Orange Soda, or even specialty waters, I’ve got the Best Dad Ever SVG Free for you! Plus a fun project to put those best dad SVG files to use.

This is also the Monthly SVG Bundle I share with you from my crafty friends & me, and the theme this month is Father’s Day!

best dad ever svg free applied to a 6-pack beer carrier and a bottle opener.

One of the reasons I love this project is how easy it is to make. I used HTV (heat transfer vinyl) for the beverage carrier. I then used permanent vinyl for the bottle opener.

I applied the same SVG on both sides of both items, but you can personalize them more. You decide!

I made the Best Dad Ever SVG 4″ once inside Cricut Design Space and it seemed to fit the beverage holder perfectly. I will let you in on a little secret, LOL!

After I made this the first time, I went back into Adobe Illustrator and increased the size of the dot on the small I and the dot after Co. Then I made another beverage holder with the updated file and I loved it much better and I believe you will too!

Much easier to weed without having a small dot flip into outer space in your craft room. Ha!

The SVG I used for the bottle opener I sized to 3.5″ high and this fit perfectly as well. In fact, it makes good use of your vinyl scraps as well. Got to love when that happens!

BEST DAD EVER PROJECT SUPPLIES

Table of Contents

GET YOUR FREE BEST DAD EVER SVG

Quick View Steps:

Download Free Best Ever SVGS

Upload into Cricut Design Space, then add to the canvas

Ungroup the 2 SVGs.

Size your designs to fit your project. If you are making this specific project, I sized the Logo to 4″. I sized the bottle opener to 3.5″ High.

Be sure to select the entire Logo design and then select “Attach” so it will cut out together on one mat. The other colors will each have their own mats per color.

Click on “Make It”

Select your Cricut machine and materials. Be sure to mirror if using any “HTV” (heat transfer vinyl) or Infusible Ink.

Once ready to cut, you will only need your fine point blade for either project.

If using HTV as I did for the Logo, place your HTV shiny side down on either the blue or green mat.

Press “load” then “go”

pressing load and go when prompted on Cricut machine

Once cut, turn the mat upside down and remove HTV from the mat.

Now let’s weed the bottle opener pieces, being sure to keep the backer sheet for the 2 bottle pieces as shown below. You will be adding the words: Best, Dad, and Ever to the bottle backer sheet since this design has no solid piece.

Once weeded, place the Best, Dad, and Ever carefully spaced evenly between the top bottle part and bottom bottle part.

applying vinyl words of best dad ever to the backer sheet of the bottle piece

Apply transfer tape to the entire design on top of the backer sheet

showing the best dad ever vinyl pieces placed on the back sheet completed

Clean bottle opener with alcohol and lint-free cloth to ensure the vinyl will stick firmly

cleaning the bottle opener with alcohol and lint-free cloth before applying the vinyl to the bottle opener

Peel the backer sheet off carefully

removing the backer sheet from the transfer tape

Carefully line up design and apply design, then firmly rub into place to ensure a good tight seal of vinyl to the bottle opener.

applying the transfer tape with vinyl on the clean bottle opener

Now peel off the transfer sheet to reveal you’re amazing work!

removing the transfer tape from the vinyl design

Let’s complete the beverage holder

Carefully weed the Logo design

Measure the beverage carrier. Mine measured 7 1/2″ across. I used a pencil to mark a line at the top and bottom of the carrier at 3 7/5″. Once HTV is applied you can simply erase the pencil marks.

measuring the beverage carrier and marking with pencil

I used the Heat Press Guide found here For this project using my Easy Press 2. It is a 5-sec pre-heat @315° and applies design for 30 seconds @315° with a cool peel.

pre-heating the beverage carrier for 5 seconds

Place design and press for 30 sec.

Pressing 30 seconds then cooling off before peeling off the transfer sheet

And once again we reveal your ah-mazing project to your loved ones!

once cooled, remove transfer sheet and reveal completed best dad ever svg free project

VIDEO: STEP BY STEP PROCESS

Check out these talented designers’ free SVGS they’re sharing!

MORE FREE FATHER’S DAY SVG FILES

Pen and Posh Fathers Day Card

The Crafty Blog Stalker Rad Dad

We Can Make That World’s Okayest Dad SVG

Creates with Love Best Dad Ever

Crafting in the Rain Two Thumbs and Awesome Kids

Sprinkle DIY Best Daddy Ever

Looking for more Father’s Day Projects?

Please always feel free to ask any questions or even leave a helpful tip I may have forgotten or did not think to include in this post! You can leave a comment or question below or on my YouTube channel.

Let’s all help each other and “create with love”.

♥♥♥ If you found this post or video helpful or want to save it for later, please pin one of these below or both!